E-Cat World Demo Landing Page

I decided it might be useful to make a dedicated page for the E-Cat Presentation. I imagine that there will be more information coming out before the event, and of course during and afterwards, and I think it could be helpful to have a single place to post important links and information.

This page could also be something people could share with others beforehand to alert them about the upcoming presentation.

The link is: www.e-catworld.com/demo

I will be updating it as new information is provided, so check back frequently for the latest updates, and let me know if you have any suggestions.

  • tan

    Yes, I’m exploiting it for is’ entertainment value, too. Don’t expect anything of value ’til 2025 & beyond, if ever.kenko1

  • Henry Grob

    MichelNovember 18, 2017 at 8:32 AMDear Dr Rossi,Will it be possible to interact directly with you or your team after the presentation?Regards,MichelSteven N. KarelsNovember 18, 2017 at 5:16 AMDear Andrea Rossi,To clarify your response to Dr. Joseph Fine — N number of eCat reactors will be all running at 30% of their maximum output value? So if N = 1, the overall thermal output would be 6W, while if N = 100, the overall thermal output would be 600W, assuming the rated maximum output power of a single reactor is 20W

  • isaiah

    JPRNovember 21, 2017 at 4:25 AMUpdate?TranslateAndrea RossiNovember 21, 2017 at 5:39 AMJPR:I feel prepared for the demo. Checking all the particulars, though.Warm Regards,A.R.

  • Nathan

    Greg LeonardNovember 15, 2017 at 10:22 AMDear AR,Thank you for setting up your demonstration for us all to see. Should we expect the QuarkX to be run at less than maximum – to make an error free demo almost certain?regards,Greg LeonardAndrea RossiNovember 15, 2017 at 11:26 AMGreg Leonard:YesWarm RegardsA

  • sam

    November 30, 2017 at 7:26 AM
    Dr Andrea Rossi:
    If you will be able to put the product for sale in an industrialized feature within 2018, that will be another miracle.
    Godspeed,
    Jim

    Andrea Rossi
    November 30, 2017 at 7:33 AM
    J.U.:
    True, but we are working hard.
    Warm Regards,
    A.R.

    JPR
    November 30, 2017 at 7:27 AM
    Aftermath update?
    JPR

    Andrea Rossi
    November 30, 2017 at 7:32 AM
    JPR:
    Now we are focused on the robotized lines and on the miniaturization and design of the E-Cat QX.
    Warm Regards,
    A.R.

    Frank Acland
    November 29, 2017 at 6:40 PM
    Dear Andrea,

    The important agreement you speak of, was it a direct result of the demo you did in Stockholm, or did it come from some earlier contact?

    Best wishes,

    Frank Acland

    Andrea Rossi
    November 30, 2017 at 2:05 AM
    Frank Acland:
    It has been a direct result of the Stockolm event: it has been attended by very high level persons, either from the scientific and the industrial point: the IVA conference room acted just like a reactor containing strongly reactive elements…
    Warm Regards,
    A.R.

    Daniel G. Zavela
    November 30, 2017 at 1:39 AM
    Dear Dr. Rossi:

    The COP of 550 you demonstrated at Stockholm with the E-Cat QX at 30% power was amazing!
    Do you anticipate running the commercial E-Cat QX units at greater than 30% power or will you limit their operation to 30% for safety reasons? Does the internal fuel last significantly longer if the E-Cat QX is run at 30% power versus 100% power?

    Looking forward to more good news from the Leonardo Corporation in 2018.

    Best Regards,

    Daniel G. Zavela

    Andrea Rossi
    November 30, 2017 at 2:01 AM
    Daniel G.Zavela:
    Thank you for your kind attention.
    During the test at the IVA I put the power at 30% to put the probability of breaks at zero point. The product will perform better, also because now we are focusing on the industrialization and this means also eliminate the overheating problem. We are working along two lines: 1- industrialization of the product, 2- industrialization of the production. These two processes normally are completed up to 10 years ( the CEO of a car industry told me up to 20 years), but we think it will take less than 2 years in our case. I hope one year, but it will be rude.
    The charge was standard.
    Warm Regards,
    A.R.

  • sam

    Frank Acland
    December 1, 2017 at 12:50 PM
    Dear Andrea,

    Can you say what was the average power output of the reactor you did the 5 Sigma testing on? And for how long it ran in total?

    Many thanks,

    Frank Acland

    Andrea Rossi

    December 1, 2017 at 12:57 PM

    Frank Acland:

    single module 20 W average, but we were alone and could repair any
    inconvenience: can you imagine the consequences should something go
    wrong in front of that audience?

    I did not sleep for the three nights since when I arrived in Stockolm on
    the 21st. Yesterday I came back to Miami, now the focus is exclusively
    on the industrialization.

    Warm Regards,

    A.R.

    Adrian Ashfield

    December 1, 2017 at 11:20 AM

    Dear Andrea Rossi:

    You say the E-Cat QX worked at limited power during the Stockolm event at the IVA (20 W). What is its real power?

    Regards,

    Adrian Ashfield

    Andrea Rossi

    December 1, 2017 at 12:31 PM

    Adrian Ashfield:

    Average 60 W, max for continuous operation 100 W

    Warm Regards,

    A.R.

  • sam

    Comment from LENR Forum.

    Alan Smith
    Moderator

    Nov 26th 2017

    maryyugo wrote:

    I would love to know what HARD questions were asked of Rossi by Alan or anyone else and what he answered.

    I never had any opportunity to ask question at all , since he was
    besieged by journalists (1, anyway) and curious new and old investors.
    He did seem very relaxed though, so I don’t think they were there for
    blood, certainly the ones I spoke to were expressing both confidence and
    the need for patience. As for anyone else, maybe they will tell you
    themselves what questions they asked and how they were answered.. Nobody
    was forced to wear a name-tag or show their affiliation so I only
    learnt a few names. U was mostly chatting with the other Lugano authors.
    You should realise that there were 70 people at the demo, many hungry
    for time with Rossi, I would have had more chance to ask questions of
    the Pope.