Site icon

Mats Lewan Meets Rossi in Sweden, Rossi Bidding on Factory For QuarkX Production

Mats Lewan has posted a new article in his An Impossible Invention blog where he reports on meeting Andrea Rossi last week in Sweden where he was visiting to look at a building for use as a factory. The article is here: https://animpossibleinvention.com/2016/05/16/rossi-makes-offer-on-swedish-factory-building-plus-more-updates/

Mats has provided many interesting details in this article including the following items which he was told by Rossi.

  • The two IH representatives present at the test were Barry West and Fulvio Fabiani (who worked for Rossi from January 2012 until August 2013, when the MW plant was delivered to IH in North Carolina, after which he was paid by IH as an expert who would make the technology transition from Rossi to IH easier). West and Fabiani reported to JT Vaughn every day on the phone.
  • Three interim reports, about every three months, with basically the same results as in the final report, were provided by the ERV during the test.
  • During summer 2015, IH offered Rossi to back out from the test and cancel it, with a significant sum of money as compensation. Rossi’s counter offer was to give back the already paid 11.5M and cancel the license agreement, but IH didn’t accept.
  • The unidentified customer (‘JM Products’) using the thermal energy from the MW plant, had its equipment at the official address—7861, 46th Street, Doral, Fl. The total surface of the premises was 1,000 square meters, of which the MW plant used 400 and the customer 600.
  • The equipment of the customer measured 20 x 3 x 3 meters, and the process was running 24/7.
  • The thermal energy was transfered to the customer with heat exchangers and the heat that was not consumed was vented out as hot air through the roof.
  • The water heated by the MW plant was circulating in a closed loop, and since the return temperature was varying, due to different load in the process of the customer, Rossi insisted that the energy corresponding to heating the inflowing cooled water (at about 60˚C) to boiling temperature would not be taken into account for calculating the thermal power produced by the MW plant. The ERV accepted.
  • He also insisted that an arbitrary chosen 10 percent should be subtracted in the power calculation, with no other reason than to be conservative. The ERV accepted.
  • IH never had access to the customer’s area. At the end of the test, an expert hired by IH, insisted that it was important to know where the water came from and where it was used. The ERV explained that this had no importance.
  • The average flow of water was 36 cubic meters per day.
  • At the end of the test, the ERV dismounted all the instruments by himself, in the presence of Rossi and IH, packed them and brought everything to DHL for transportation to the instrument manufacturers who would recalibrate the instruments and certify that they were not manipulated.
  • After the test, IH wanted to remove the MW plant from the premises in Florida, but Rossi would not accept until the remaining $89M were paid according to the license agreement. Rossi’s and IH’s attorneys then agreed that both parties should lock the plant with their own padlocks (as opposed to the claim by Dewey Weaver that ‘IH decided to padlock the 1MW container after observing and documenting many disappointing actions and facts’).

It’s interesting to read that Industrial Heat apparently offered to pay Rossi to cancel the test, and that Rossi’s response was to return the $11.5 he had been paid to cancel the contract. It makes one wonder what IH’s reasoning would be for that. The article is well worth reading in full.

Exit mobile version